ENHANCED SERIES INTRODUCTION

The Nextion Enhanced Series has 7 HMI display sizes including 2.4”, 2.8″, 3.2”, 3.5”, 4.3”, 5.0” and 7.0”.

What’s the difference between Enhanced Series and Basic Series?
— The Enhanced Series hardware feature of 3.5″ and above is more powerful than Basic Series in terms of MCU, Flash Storage and SRAM.
— The Enhanced Series integrates RTC for keeping accurate time, EEPROM for users’ data storage and 8 digital GPIOs (4 PWM capable).

For Enhanced Series, users also can develop the HMI GUI project via the free Nextion Editor software, the easy Drag-and-Drop components and simple ASCII text based instructions will dramatically reduce the HMI project development workloads. The integration of RTC, EEPROM and digital GPIOs enhances your HMI project features and functions.

READ MORE
NEXTION ENHANCED HMI DISPLAY
MODEL NAMENX3224K024NX3224K028NX4024K032NX4832K035NX4827K043NX8048K050NX8048K070NX8048K070-011R/011C
Size2.4″2.8″3.2″3.5″4.3″5.0″7.0″7.0″
Resolution320*240320*240400*240480*320480*272800*480800*480800*480
Touch PanelRTPRTPRTPRTPRTPRTPRTPRTP/CTP
Color6553665536655366553665536655366553665536
Flash16 MB16 MB16 MB32 MB32 MB32 MB32 MB32 MB
RAM3584 Byte3584 Byte3584 Byte8192 Byte8192 Byte8192 Byte8192 Byte8192 Byte
MCU48 MHz48 MHz48 MHz108 MHz108 MHz108 MHz108 MHz108 MHz
EEPROM1024 Byte1024 Byte1024 Byte1024 Byte1024 Byte1024 Byte1024 Byte1024 Byte
GPIOs88888888
RTCYesYesYesYesYesYesYesYes
EnclosureNoNoNoNoNoNoNoYes
SKUIM160511002IM160511003IM160511004IM160511005IM160511006IM160511007IM160511008IM170428001/IM170421001
DatasheetClickClickClickClickClickClickClickClick
Price$22.9$25.4$32.4$39.9$54.9$69.9$89.9$92.9/108
icoBUY NOWBUY NOWBUY NOWBUY NOWBUY NOWBUY NOWBUY NOWBUY NOW

Notes: Nextion product numbering rules , eg. NX8048K070-011C

NX – Nextion
80 – Horizontal resolution: 32-320 40-400 48-480 80-800 10-1024
48 – Vertical resolution: 24-240 27-272 48-480 60-600

K – Series model: T=Basic series, K=Enhanced series, P=Intelligent series
070 – Display size:”070″ means 7.0″
C – Touch screen type: C=capacitive touch, R=resistive touch

ACCESSORIES
nextion_pro

IN THE BOX

NexMIDI*1
XH2.54 4P wire*2

NEXTION MIDI I/O INTERFACE

Two 4-pin XH connectors for 5V power supply, TX, RX and GND allow this interface to be easily daisy-chained between either a power supply / USB to TTL serial adapter like the Nextion Foca Max, or any MCU (Arduino, etc.) on one side (J1) and a Nextion HMI display on the other side (J2). The on-board switch SW1 allows to select between 2 modes:

* PRGM: RX + TX signals are directly routed from J1 to J2 which allows to program the device on J2 by the device on J1 while the MIDI interface is idle.
* MIDI I/O: RX + TX signals from the device on J2 are converted and linked to the MIDI IN and MIDI OUT 5-pin DIN sockets.

NEXTION MICRO SD EXTENDER

1. Feel hard to reach the micro SD card slot?
2. Have to disassemble the product enclosure for the HMI project update?
3. Other extension tools are not working properly?

The Nextion Micro SD card extender helps you to access the SD card slot of the Nextion HMI display more conveniently. It supports the FAT32 Micro SD card as well as all series of Nextion HMI displays compatibilities.

nextion_pro

IN THE BOX

Micro SD card extender*1

nextion_pro

IN THE BOX

Foca Max*1
USB cable*1
XH2.54 4P wire*1

FOCA MAX- USB TO TTL CONVERTER BOARD

Foca Max is a USB to TTL serial converter board with 5.5V2A output. it integrates a high power and energy-efficient DC-DC chip of TPS54331 for a wide voltage input with small voltage ripple. For USB to TTL conversion, the Foca Max can be power supplied by USB only or USB together with external DC 8-26V, The USB and external DC power supplies are isolated by using a diode (SS34) to avoid the current backflowed between them.

Note: as for the Nextion HMI display size less than 4.3”, you can only use the USB for power supply, size large than 4.3”, a external DC 8-26V for power supply is recommended.

EXPANSION BOARD FOR NEXTION ENHANCED
DISPLAY I/O EXTENDED

The first expansion board for Nextion Enhanced HMI displays.
– for use with any of the 2.4″, 2.8″, 3.2″, 3.5″, 4.3″, 5.0″, 7.0″ Enhanced models.
Supports the Enhanced Nextion’s 8 Digital/PWM GPIOs

The board includes 6 buttons, 1 LED, 1 Piezo buzzer, and 0.1″/2.54mm breakout:Esc (IO 0),
Enter (IO 1), Left (IO 5), Right (IO 2), Up (IO 4) and Down (IO 3)LED (IO 6) and small PWM Piezo buzzer (IO 7).

IN THE BOX

Expansion Board*1
FCC 1.0mm pitch cable*1

Note: the Nextion display is not included.

IN THE BOX

Nextion IO Adapter*1
FCC 1.0mm pitch cable*1

NEXTION IO ADAPTER

The Nextion IO Adapter is made specially to work with Nextion Enhanced and Intelligent HMI Display Series
– for use with any of the 2.4″, 2.8″, 3.2″, 3.5″, 4.3″, 5.0″, 7.0″, 10.1″ Enhanced and Intelligent models.

This small board breaks out the Nextion’s GPIOs to 0.1 inch /2.54 mm headers,
allowing users to conveniently connect external devices to the Nextion’s Digital/PWM GPIOs.